AURISINA GRANITELLO
The marble Aurisina Granitello is used for floor and wall coverings for both exterior and interior. Appearance: light background with small spots very dense with a pinkish gray color overall.
ITALIA Aurisina (Trieste)
CHEMICAL COMPOSITION
CaCO3: 99,41%
MgCO3: 0,41%
FeCO3: --
Insoluble residue in HCL: traces
MgCO3: 0,41%
FeCO3: --
Insoluble residue in HCL: traces
TECHNICAL SPECIFICATIONS
| Hardness: | 4 | Mohs |
| Wheight for unit of volume: | 2.7 | gr/cm³ |
| Density: | 2.73 | gr/cm³ |
| Water Absorption (by weight): | 3.5 | % |
| Porosity: | 5.6 | % |
| Compressive Strength: | 1019 | kgf/cm² |
| Compressive strength after freezing: | 1019 | kgf/cm² |
| Strenght to bending: | 170 | kgf/cm² |
| Thermal linear expansion coefficient: | 0.0037 | mm/ml °C |
| Strenght to blow: | 4 | kgf/cm² |
| Average Abrasion Strenght: | 14.1 | cm³/50 cm |
| Average Tensile Strenght: | 63 | kgf/cm² |
| Impact test (min. fall height): | 35 | cm |
PRODUCTS
BLOCCHI A TONNELLATA, FILAGNE GREZZE, FILAGNE LEVIGATE, LASTRE LEVIGATE , LASTRE PIANO SEGA, LASTRE SPAZZOLATE, LASTRE STUCCATE LUCIDATE, PAVIMENTO BOCCIARDATO, PAVIMENTO GREZZO , PAVIMENTO LEVIGATO
Suggested similar materials
Product stock available (AUG)
Blocks Aurisina Granitello
Block-ID |
Finish |
L x P x H (cm.) |
Pcs |
Q.ty |
UM |
Weight |
|---|---|---|---|---|---|---|
| 19982 | Sawn Cut | 225 x 103 x 80 | 1 | 5,18 | TO | 5.180 |
| 19648 | Sawn Cut | 322 x 195 x 120 | 1 | 20,00 | TO | 20.000 |
Aurisina Granitello
Block-ID |
Finish |
L x P x H (cm.) |
Pcs |
Q.ty |
UM |
Weight |
|---|---|---|---|---|---|---|
| 19983 | 1 | 3,00 | TO | 3.000 | ||
| 19984 | 1 | 4,00 | TO | 4.000 | ||
| 19985 | 1 | 3,74 | TO | 3.740 | ||
| 19986 | 1 | 3,08 | TO | 3.080 |
Block-ID |
Finish |
L x P x H (cm.) |
Pcs |
Q.ty |
UM |
Weight |
|---|---|---|---|---|---|---|
| 19981 | Sawn Cut | 100 x 30 x 2 | 44 | 13,20 | MQ | 713 |
| 0 | 100 x 30 x 2 | 44 | 13,20 | MQ | 713 | |
| 19115 | Honed | 100 x 30 x 2 | 590 | 212,50 | MQ | 11.474 |
| 0 | 100 x 30 x 2 | 46 | 13,80 | MQ | 745 | |
| 0 | 100 x 30 x 2 | 64 | 19,20 | MQ | 1.037 | |
| 0 | 100 x 30 x 2 | 50 | 15,00 | MQ | 810 | |
| 0 | 100 x 30 x 2 | 75 | 22,50 | MQ | 1.215 | |
| 0 | 100 x 40 x 2 | 45 | 18,00 | MQ | 972 | |
| 0 | 100 x 40 x 2 | 41 | 16,40 | MQ | 886 | |
| 0 | 100 x 40 x 2 | 44 | 17,60 | MQ | 950 | |
| 0 | 100 x 40 x 2 | 44 | 17,60 | MQ | 950 | |
| 0 | 100 x 40 x 2 | 43 | 17,20 | MQ | 929 | |
| 0 | 100 x 40 x 2 | 39 | 15,60 | MQ | 842 | |
| 0 | 100 x 40 x 2 | 47 | 18,80 | MQ | 1.015 | |
| 0 | 100 x 40 x 2 | 52 | 20,80 | MQ | 1.123 | |
| 10; | 237 x 167 x 2 | 1 | 3,96 | MQ | 214 |
Aurisina Granitello
Block-ID |
Finish |
L x P x H (cm.) |
Pcs |
Q.ty |
UM |
Weight |
|---|---|---|---|---|---|---|
| 19475 | 2 | 1 | 2,18 | MQ | 117 | |
| 19475 | 2 | 1 | 2,18 | MQ | 117 |
Block-ID |
Finish |
L x P x H (cm.) |
Pcs |
Q.ty |
UM |
Weight |
|---|---|---|---|---|---|---|
| 19115 | Honed | 2 | 1 | 3,96 | MQ | 214 |
| 0 | 100 x 30 x 2 | 46 | 13,80 | MQ | 745 | |
| 0 | 100 x 30 x 2 | 64 | 19,20 | MQ | 1.037 | |
| 0 | 100 x 30 x 2 | 50 | 15,00 | MQ | 810 | |
| 0 | 100 x 30 x 2 | 75 | 22,50 | MQ | 1.215 | |
| 0 | 100 x 40 x 2 | 45 | 18,00 | MQ | 972 | |
| 0 | 100 x 40 x 2 | 41 | 16,40 | MQ | 886 | |
| 0 | 100 x 40 x 2 | 44 | 17,60 | MQ | 950 | |
| 0 | 100 x 40 x 2 | 44 | 17,60 | MQ | 950 | |
| 0 | 100 x 40 x 2 | 43 | 17,20 | MQ | 929 | |
| 0 | 100 x 40 x 2 | 39 | 15,60 | MQ | 842 | |
| 0 | 100 x 40 x 2 | 47 | 18,80 | MQ | 1.015 | |
| 0 | 100 x 40 x 2 | 52 | 20,80 | MQ | 1.123 | |
| 10; | 237 x 167 x 2 | 1 | 3,96 | MQ | 214 | |
| 19115 | Sawn Cut | 2 | 37 | 146,44 | MQ | 7.909 |
| 16-49; | 237 x 167 x 2 | 34 | 134,57 | MQ | 7.267 | |
| 59; | 237 x 167 x 2 | 1 | 3,96 | MQ | 214 | |
| 76; | 237 x 167 x 2 | 1 | 3,96 | MQ | 214 | |
| 77; | 237 x 167 x 2 | 1 | 3,96 | MQ | 214 | |
| 19320 | Sawn Cut | 2 | 1 | 4,63 | MQ | 250 |
| 1; | 286 x 162 x 2 | 1 | 4,63 | MQ | 250 | |
| 19475 | Sawn Cut | 2 | 14 | 56,91 | MQ | 3.073 |
| 1-10; 50-53; | 271 x 150 x 2 | 14 | 56,91 | MQ | 3.073 | |
| 19485 | Sawn Cut | 2 | 24 | 129,64 | MQ | 7.000 |
| 12-17; 23-40; | 277 x 195 x 2 | 24 | 129,64 | MQ | 7.000 | |
| 19519 | Sawn Cut | 2 | 36 | 149,69 | MQ | 8.083 |
| 1-36; | 315 x 132 x 2 | 36 | 149,69 | MQ | 8.083 | |
| 19520 | Sawn Cut | 2 | 29 | 107,63 | MQ | 5.812 |
| 1-29; | 241 x 154 x 2 | 29 | 107,63 | MQ | 5.812 | |
| 19550 | Sawn Cut | 2 | 21 | 124,08 | MQ | 6.700 |
| 01-21; | 303 x 195 x 2 | 21 | 124,08 | MQ | 6.700 | |
| 19945 | Sawn Cut | 2 | 22 | 113,63 | MQ | 6.136 |
| 9-30; | 269 x 192 x 2 | 22 | 113,63 | MQ | 6.136 | |
| 19207 | Sawn Cut | 3 | 2 | 5,70 | MQ | 462 |
| 12-13; | 230 x 124 x 3 | 2 | 5,70 | MQ | 462 | |
| 19482 | Sawn Cut | 3 | 26 | 63,91 | MQ | 5.176 |
| 1-7; | 235 x 103 x 3 | 7 | 16,94 | MQ | 1.372 | |
| 9-27; | 240 x 103 x 3 | 19 | 46,97 | MQ | 3.804 | |
| 19780 | Sawn Cut | 3 | 14 | 34,50 | MQ | 2.794 |
| 1-6; 13; | 233 x 106 x 3 | 7 | 17,29 | MQ | 1.400 | |
| 14-20; | 232 x 106 x 3 | 7 | 17,21 | MQ | 1.394 | |
| 19642 | Brushed | 2 | 27 | 164,49 | MQ | 8.883 |
| 14-19; | 318 x 193 x 2 | 6 | 36,82 | MQ | 1.989 | |
| 20-29; | 315 x 193 x 2 | 10 | 60,80 | MQ | 3.283 | |
| 30-40; | 315 x 193 x 2 | 11 | 66,88 | MQ | 3.611 | |
| 19751 | Brushed | 3 | 27 | 154,61 | MQ | 12.523 |
| 01; | 295 x 180 x 3 | 1 | 5,31 | MQ | 430 | |
| 02; | 295 x 185 x 3 | 1 | 5,46 | MQ | 442 | |
| 03-06; | 295 x 190 x 3 | 4 | 22,42 | MQ | 1.816 | |
| 07-12; | 295 x 196 x 3 | 6 | 34,69 | MQ | 2.810 | |
| 13-18; | 295 x 196 x 3 | 6 | 34,69 | MQ | 2.810 | |
| 19-21; 33-35; | 295 x 196 x 3 | 6 | 34,69 | MQ | 2.810 | |
| 22-24; | 295 x 196 x 3 | 3 | 17,35 | MQ | 1.405 | |
| 19108 | Polished Plaster | 2 | 61 | 243,22 | MQ | 13.134 |
| 1; | 202 x 163 x 2 | 1 | 3,29 | MQ | 178 | |
| 2; | 200 x 176 x 2 | 1 | 3,52 | MQ | 190 | |
| 3-10; | 207 x 176 x 2 | 8 | 29,15 | MQ | 1.574 | |
| 11-20; | 216 x 176 x 2 | 10 | 38,02 | MQ | 2.053 | |
| 21-30; | 220 x 176 x 2 | 10 | 38,72 | MQ | 2.091 | |
| 31-36; | 226 x 176 x 2 | 6 | 23,87 | MQ | 1.289 | |
| 37-41; | 228 x 176 x 2 | 5 | 20,06 | MQ | 1.083 | |
| 42-46; | 234 x 176 x 2 | 5 | 20,59 | MQ | 1.112 | |
| 47-51; | 268 x 176 x 2 | 5 | 23,58 | MQ | 1.274 | |
| 52; | 232 x 176 x 2 | 1 | 4,08 | MQ | 220 | |
| 53-55; | 238 x 176 x 2 | 3 | 12,57 | MQ | 679 | |
| 56-61; | 244 x 176 x 2 | 6 | 25,77 | MQ | 1.391 | |
| 19114 | Polished Plaster | 2 | 37 | 103,61 | MQ | 5.595 |
| 1-9; | 210 x 144 x 2 | 9 | 27,22 | MQ | 1.470 | |
| 12-28; | 220 x 144 x 2 | 17 | 53,86 | MQ | 2.908 | |
| 29-32; | 160 x 140 x 2 | 4 | 8,96 | MQ | 484 | |
| 33-38; | 140 x 140 x 2 | 6 | 11,76 | MQ | 635 | |
| 39; | 140 x 130 x 2 | 1 | 1,82 | MQ | 98 | |
| 19519 | Polished Plaster | 2 | 5 | 20,79 | MQ | 1.123 |
| 37-41; | 315 x 132 x 2 | 5 | 20,79 | MQ | 1.123 | |
| 19520 | Polished Plaster | 2 | 1 | 2,48 | MQ | 134 |
| 34; | 236 x 105 x 2 | 1 | 2,48 | MQ | 134 | |
| 19318 | Polished Plaster | 3 | 1 | 2,46 | MQ | 199 |
| 17; | 200 x 123 x 3 | 1 | 2,46 | MQ | 199 |
Flooring Tiles Aurisina Granitello
Block-ID |
Finish |
L x P x H (cm.) |
Pcs |
Q.ty |
UM |
Weight |
|---|---|---|---|---|---|---|
| 19972 | Bush Hammered | 100 x 30 x 2 | 107 | 32,10 | MQ | 1.733 |
| 0 | 100 x 30 x 2 | 107 | 32,10 | MQ | 1.733 | |
| 19661 | Bush Hammered | 100 x 30 x 3 | 23 | 6,90 | MQ | 559 |
| 1 | 100 x 30 x 3 | 23 | 6,90 | MQ | 559 | |
| 19207 | Sawn Cut | 50 x 50 x 3 | 1 | 0,25 | MQ | 20 |
| 0 | 50 x 50 x 3 | 1 | 0,25 | MQ | 20 | |
| 19981 | Honed | 30.5 x 30.5 x 1 | 60 | 5,58 | MQ | 151 |
| 0 | 30.5 x 30.5 x 1 | 60 | 5,58 | MQ | 151 |
Finish Bush Hammered: Finish by hitting the stone with a bush hammer (a special hammer with a grooved head comprised of 16 to 64 teeth) which leaves a rough but consistent grid texture of 1 to 3 mm deep.
Finish Honed: The honed finish is obtained through the rotation on the surface of an abrasive stone. It gives the material excellent characteristics of precision and roughness and applies to marble, granite, travertine and sandstone natural stone.